rowsaan Curve hook



  • rowsaan Curve hook
  • rowsaan Curve hook

This product is currently sold out.

Brass, 40mm tall

The Curve hook is forged, worked and soldered before etching which gives the brass a bright matte finish. The Curved hook is designed to hold a main load on the curved hook and an apron or similar over the top bent section.

Included hardware:
10mm brass screw suitable for installing into timber / ply (or masonry using a masonry plug, masonry plug not included). Plasterboard anchor suitable for installing onto a plasterboard wall.

Wood: Drill a 2.5mm hole in the wood. Install using the supplied brass screw and tighten until snug.

Masonry: Drill a 6mm hole 25mm deep and insert the supplied red masonry wall plug flush with the wall. Install using the supplied brass screw and tighten until snug.

Plasterboard: Drill a 10mm hole in the plasterboard. Pass the screw from the plasterboard anchor through the hook and screw it into the v shaped spring. Press the spring together and push it through the hole in the plasterboard. Tighten until snug.


The finish of all rowsaan work will patina slightly with age and use. If a brass object oxidises more quickly (which is more likely in a damp environment or coastal location) lightly rubbing the surface with super fine steel wool, rinsing in warm soapy water and applying a thin coat of mineral oil will help remove oxides. Silver utensils can be rinsed in warm soapy water and then dried when needed. Please note that the finish on all of our objects will vary slightly in brightness and texture.

Share this

Pin Post Plus

Similar Products